Change the IP address of an AudioCodes MP-112 VoIP Gateway
25 February, 2010 - 10:38 — tom8787
One of the useful elements in an all-IP environment is an AudioCodes VoIP gateway. The problem with the thing is the IP address. If you want to access it, but you don't have the IP address available, you can change it by using an analog telephone.
- Connect the phone to FXS port 1
- Pick up the phone, and dial ***12345
- Dial 1# to change the IP address
- A voice will spell the current address partially.
- Press #
- The system asks to enter the new IP address
- Enter the new address, use * for a . (so 127*0*0*1 for example)
- The system repeats the IP address entered
- Press 1 to save it
To change the subnet mask you have to choose #2, to change the default gateway you have to choose #3 in the beginning.
After this is done, you can log in using the web interface. Default username and password are Admin-Admin.
***
It is very simple reset device
then ip : 10.1.10.10
user : admin
pass ; admin
***
Use bootp software(Audio Codecs CD) send this config file
reset.ini
-----------------------
[SYSTEM Params]
RESETWEBPASSWORD
[BSP Params]
-----------------------
- Connect the phone to FXS port 1
- Pick up the phone, and dial ***12345
- Dial 1# to change the IP address
- A voice will spell the current address partially.
- Press #
- The system asks to enter the new IP address
- Enter the new address, use * for a . (so 127*0*0*1 for example)
- The system repeats the IP address entered
- Press 1 to save it
To change the subnet mask you have to choose #2, to change the default gateway you have to choose #3 in the beginning.
After this is done, you can log in using the web interface. Default username and password are Admin-Admin.
***
It is very simple reset device
then ip : 10.1.10.10
user : admin
pass ; admin
***
Use bootp software(Audio Codecs CD) send this config file
reset.ini
-----------------------
[SYSTEM Params]
RESETWEBPASSWORD
[BSP Params]
-----------------------
XPON ONT Router is a modern device that provides high-speed internet to homes and offices. The application XPON ONT device is to connect multiple devices at once and make sure connectivity of all devices is up to the mark. UBIQCOM precisely creates XPON ONT products that are highly capable of delivering the best broadband speed.
ReplyDelete